Epson Printer Not Turning On: Common Solutions For Won’t Turn On

If your Epson printer has no power and won’t turn on, you’re not alone. Many users face this frustrating issue, but there are solutions available. This guide will walk you through troubleshooting steps to identify and resolve the problem

If you can’t get your Epson printer to switch on, identify the underlying problems that are causing it. Furthermore, we advise you to carefully read the entire text and adhere to all of the instructions listed below:

Obstacles You May Face When Epson Printer Not Turning On

• The Epson printer is not powering up.
• the printer’s paper jamming.
• Incorrect I/F card installed.
• It is incorrect to attach the maintenance tank.
• It has the front cover open.
• printing lever being released while printing.
• It is impossible to clean the head with the heavy loading paper.
• Frequently, colors dry out.
• Wastage ink fills the maintenance tank to the brim.
• The printing stops because there are not enough papers.

Try the solutions listed below if any of these problems arise for you. However, repeatedly going through the resolution procedure could cause more harm to your printer. Thus, while diagnosing the problem, remain vigilant and cautious.

Methods To Resolve Epson Printer No Power

Some of the most effective methods for resolving the problem of an Epson printer that continually going off are included here. Therefore, do the following actions:

This is a list of some of the greatest fixes/workarounds for the problem. In the unlikely event that your printer unintentionally switches on and then turns off after a short while, these fixes will also come in useful. Okay, let’s get going.

Solution 1: Force Restart the Printer

• Unplug the power cable first.
• Let the printer run in the background for a few minutes.
• Connect the power cord to the electrical socket board after that.
• For a duration of 8 to 10 seconds, press and hold the power button.
• There will be a flashing power light indicator. It will then begin blinking after that.
• The printer will start up normally if the button is released.
• You will need to wait until the printer has completed startup if the light continues to flash.
• Hopefully the printer will turn on.

Solution 2: Check for any Physical Damage

• Observe the entire device physically.
• Check whether there are any signs of damage.
• If there is, then change the place of the printer.
• It seems that you might not be the expert in dealing with the hardware.
• So, leave the rest of the matter for the professionals.

Solution 3: Replace the Power Cable

• If the power cable is faulty, the Epson printer won’t turn on.
• So, check the power cable thoroughly.
• If you witness any wear and tear, replace the power cable as soon as possible.
• If the wires inside the cable are somehow broken, you must not use the power cable again.
• Show it to the experts and replace the cable with a new one. 

Solution 4: Remove the Jammed Paper

• It seems that the paper has been jammed inside the printer.
• You may not have noticed it. When the Epson printer not turning on, it might be due to the jammed paper still being inside the printer. So, you have to take it out.
• Open the front panel of the printer.
• All the rollers are present in their respective places.
• In between them, you will find the jammed paper. Slowly and gently, pull it out. 

Solution 5: Update the Printer Drivers

The outdated drivers of the printer must be replaced with the new drivers. The Epson printer will not turn on until and unless you do so.

• Navigate to your system.
• Make sure that all the cables and wires are connected to the system.
• Open the Device Manager and click on the Epson printer adapter.
• Right-click on the adapter and click on update drivers.
• This will take some time. After that, restart the printer to implement the changes. 

Solution 6: Replace the Faulty Rollers 

Due to the long usage of the printer, the roller slowly loses its functioning capability. The Epson printer won’t turn on in such a situation, and you need to replace the rollers. So, the solution to this problem is simple. Hire Epson printer repair experts. 

Solution 7: Improper Fitting of the Ink Tanks

It seems that you have recently replaced the empty ink tanks with a new one. Still, the Epson printer won’t turn on. Why? It is due to the improper fitting of the tanks. So, you have to re-open the tanks once again. Check for any type of debris. Fit the ink tanks once again to their respective places and close the cover. 

Remove the chances of facing “Epson Printer Powering on” Situation

Hopefully, you have fixed the issue with the help of the solutions mentioned earlier. Now, you have to be careful so that the issue must not occur again. So, use good quality A4 size papers. In addition to that, always keep the paper tray filled up. Use genuine Epson ink for good-quality printing. Lastly, always upgrade the drivers and firmware at regular intervals.

You can undoubtedly resolve the Epson printer not powering up problem by using these techniques. I hope you find this content useful in addressing any of your concerns. All of the information in this article was contributed by users, and we hope that you will find it useful in some way.