Guide to Repairing HP Printer Power Problems Easily

These are some of the directions that you must follow if you wish to solve your problem of HP Printer Not Turning On.

Step 1: Connect the Printer to a Power Source

• The power cable of your HP printer must first be connected to a power source.
• Next, you must push the power button on your HP printer to turn it on. After that, give it some time for the printer’s power light to begin flashing.
• Pressing the “turn on” button once more is necessary if the power light does not blink.
• It can take an few moment for HP printers to boot up. You will therefore need to wait patiently for the printer to start up.

Note: you must keep in mind that you don’t have to hold the power button for a long duration or else it will get turned off again.

Step 2: Check If There are Any Damages in the HP Printer Power Wire

• The HP printer cable must be unplugged from the power source in order to be examined for damage in the following step.
• You will need to visit the service center to get the power cord replaced if you notice any damage to it.
• You’ll notice that the power module, which resembles a laptop adapter, has the power wire linked to it. After removing the printer’s power module, re-plug the printer into the power source. Should the power module’s green light fail to illuminate, you can seek support from the HP printer team to resolve this issue.

Step 3: Check If the Power Wire is Properly Connected or Not

• In order to make sure that the power cord is correctly attached to the power module, you will need to reconnect the HP printer to a power source in order to address the third phase of the problem where it won’t switch on.
• Try connecting your printer wire to a different power source if, after turning on your printer, you still encounter any issues.

If the printer turns on after changing the power source, then that means there was a default in the power outlet. So, in such a case you can solve your problem of HP printer won’t turn on by changing the power source.

Step 4: Disconnect the USB Wire

If after following the above mentioned 3 steps, your HP printer does not turn on, then in that case, then you will have to try disconnecting your USB connector, which is placed at the back of your HP printer.

Then, you will be required to turn your printer on. If the printer starts after disconnecting the USB cable, then it can be because of the printer. So, you must consider the option of removing or replacing the USB wire.

Step 5: Set Your HP Printer As Default Printer

• Go to your Windows Control Panel and select “Devices and Printers”
• Find your HP Printer in the list of printing devices, make sure its the one you are having issues with. Right click on that printer and select “Set as default printer” from the drop-down menu. If there is a confirmation prompt please make sure you click “Yes”.
• You should now see a nice little green check mark below the icon of your HP printer, this means its now the default printer for Windows.
• Go give your printing a try to see if that helped you!

Step 6: HP Printer Troubleshooting

It doesn’t hurt to ask. There are some really easy troubleshooting items you can do to make sure you can print to your HP printer if it stops working or has never worked.

First, check the connection cables from the wall power to the HP printer power connector. Then, check the cabling from your printer to the Windows PC it might be connected too, is the USB cable firmly in place on both ends?

If there is a network cable running to the HP printer for HP network printing make sure that Ethernet cable is snug and check your manual to see if there should be lights blinking to indicate a network connection.

Are there lights on at the front of your HP printer? If they are not and the printer doesn’t look to be powered on, try unplugging it and plugging it back in. Then make sure you press the power on button on the printer itself.  If the light still don’t come on maybe try another power plug in your home just in case that outlet is out.

It is very easy to resolve the issue of HP printer won’t turn on by simply following the steps that are given above. In case you come across any issue while following the process that is given above, then you must get in touch with HP printer team. By doing so you will receive an accurate and immediate response to your problem.

Here, we are available with a detailed solution, where you will be need to follow certain steps.