Rockspace Wifi and Range Extender Setup – Guide and Configuration settings

How to Setup Rockspace Wifi Range Extender?

Facing difficulties in Rockspace WiFi extender setup? Unable to access re.rockspcae.local web page for Rockspace setup? If the answer is yes and you are confused about how to use the functionalities of the Rockspace extender then don’t panic! Here, you will get the best setup guide for the Rockspace range extender setup. Just scroll down and keep reading the article carefully. 

Things you’ll need for Rockspace Extender Setup

Whenever you are setting up a range extender, it is important to learn the details pertaining to the main home router. You will need some additional equipment as well. All this includes details on the RockSpace Wifi Extender Setup login page address and the login details for the main home network. Unless you have these details, you won’t be able to configure the device and connect it to the router. Here is a list of things you’ll need to make sure you have:

• RockSpace WiFi Range Extender
• Ethernet Cable(s)
• Main home router network SSID and password
• Default web address details or the IP address

Default Web/IP Address: https://www.re.rockspace.local; and https://192.168.0.254

Default Username and Password: There’s no username and password as such for the first time that you are setting up the range extender. However, if you are logging in for a consecutive time, you’ll need the details that you had specified during the initial setup.

Setup Rockspace Wifi Range Extender

There are two methods you can use to setup your RockSpace WiFi extender. You can either do that using the “WPS button or via a web browser“. Let’s start with the WPS method.

Rockspace Wifi Extender Setup Using WPS Method

• Turn on the extender. Connect it to the power socket and turn on the plug. Then wait for the led light to turn blue. Make sure the wifi router and the extender are in the same room for the setup process. 

• Once the LED light has turned blue press the WPS button on the router. Now, wait for the repeater signal LED light to turn blue. Ensure that you press the WPS button on the extender within 2 minutes of pressing the WPS button on the router.

Now you can unplug the extender and place it in the new location. Make sure the distance between the extender and the router isn’t too much.

RockSpace WiFi Extender Setup – Using Ethernet Cable or Web Browser

The manual setup method will require you to access the web address and then the RockSpace WiFi extender setup wizard to configure the network settings. Here are some steps you can follow:

• Use Ethernet cable to connect your wifi extender to your computer.
• Now open the web browser on your computer, and enter the login page of the Rockspace extender. Enter any of the URL http://192.168.0.254 or re.rockspace.local in the address bar of your web browser. 
• Now you will see a login page open up. Enter the login credentials which you will find on the box of the Rockspace wifi extender. Upon logging in, you will enter on the extender setup page. 
• Now click on the extender option to get ahead with the setup process. 
• Follow the on-screen instructions that you see, and you will be guided on how to set up the wifi extender. These on-screen instructions will help you with setting up the wifi extender. 
• Next, click on the save button to apply the changes. 
• Once you are done you can shift the extender to a new place. Unplug the Rockspace range extender and bring it to the new location. Make sure the place you will be keeping your Rockspace range extender is halfway between your wifi router and the dead network spots. 
• Now plug in the extender, and connect your device to the extender. Check whether the internet is accessible in the dead network spots from the extender or not.

Rockspace WiFi Extender Setup Via the Rs app

These amazing steps are delivered for the Rockspace wifi extender setup via the app.

• Install the RS app first on your smartphone.
• Use the play store and install this Rs app.
• Launch this app and sign up with their login credentials.
• Insert the login username or Email in the username field.
• Input the password into another field.
• Login to this wireless range extender successfully and add your extender to this app.
• Choose the device name and click on the setup wizard access option.
• Put your internet details and choose the setup wizard as an access point.
• Follow the on-screen showing directions and modify the settings as these directions.
• Lastly, save all the changes and now Rockspace Wifi Extender Setup process has been finished.

Instructions to Login to Rockspace Range Extender 

To login to the Rockspace Range Extender follow the steps given below.

• Connect your extender to your computer or mobile. You can connect the extender with wifi to your computer or mobile. Open wifi on your computer or your mobile, and then search for the wifi network “rockspace_ext”. Now connect to the wifi network of the extender. 

• Once your device has been connected to the wifi network, open your web browser. On your web browser enter the URL http://192.168.0.254 or http://re.rockspace.local. Now you will see a login page open.
• Now enter the login details into the login form.
• Once you have successfully entered the ID and password. You will be logged in into the dashboard of the Rockspace Range Extender. From here you can easily tweak the settings of the extender that you are using. You can easily customize the settings, change the password, name, and security of the network.

Guidelines to Update Rockspace Extender Firmware

Look at the below steps to update the firmware of the Rocksapce WiFi range extender:

Step 1: Once you reached the login web page of the Rockspace WiFi range extender, click on the menu bar and then click on the “Administration” option.

Step 2: After that, click on the firmware update option given under the Administration.

Step 3: Thereafter, you need to search for the file for the latest firmware updates on the configuration device.

Step 4: Hit on the install button. Now, you have to wait for some time until the update process is get completed.

Step 5: When the updation of the Rockspace WiFi range extender firmware is completed, your device will start rebooting automatically. 

Step 6: Make sure to do not turn off your device during the booting up process. 

Troubleshooting Steps for Rockspace Wireless Range Extender

Below mention the steps that are described for solving the issues of this extender. Let’s follow it:

Rockspace WiFi Range extender no internet

You have to do some following solution steps to solve this causing issue.

• Let’s verify the network connection of the router.
• Reconnect the internet in your internet-enabled device.
• Reconfigure the wireless range extender.
• Unplug the WiFi range extender and free it just for movement from the electrical wall socket.
• Plug it again and unite with the router’s network again.
• If the signal light flashes that indicate the internet connection is still working yet.

Rockspace Wireless Extender not working

Follow the below-mentioned steps, if it is not working:

• Reinstall the wireless range extender, if the signal light is now working.
• Unplug all wires and plugins repeatedly after a moment.
• If its signal lights are not working yet then reset it.
• Locate the reset button and hold it for a couple of minutes.
• Leave while it is reset appropriately.
• Switch the power and verify from its signal light it is working or not.
• If the power light blinks properly then it means this is working momentarily.

Rockspace WiFi Range extender keeps disconnecting

Here are the steps are mention for this device solution, you have to do these following steps:

• Replace the position of the wireless range extender.
• Plug out the Rockspace extender from the power strip.
• Move this range extender to another suitable location.
• Keep it closer to the router, it’s not too close or not too far.
• Just keep in the middle for accessing the signal of the network easily.
• Join the Ethernet internet cable with the LAN port appropriately.
• Lastly, switch its power and connect its network or verify that the problem is solved now.

Re.rockspace.local not working

There are some steps are presented for the solution to this issue:

• Reconnect the internet of the WiFi extender to your computer.
• Explore this address in internet explorer again.
• If this is not assessed yet, then use http://re.rockspace.local to access the web management page of this extender.
• Type the address correctly in the addressing bar.
• If it is working or surfing by the user interface then logging it and controlling the settings accordingly.

Rock space WiFi extender red light

Follow the steps to solving this Rock space WiFi extender red light issue:

• Reset the Rockspace WiFi range extender.
• Locate the Rockspace extender reset button on this range extender first.
• Hold it just for a few moments.
• Press this wireless device button for 10 to 15 seconds.
• Now, this is resetting presently.
• Verify now the Rock space WiFi extender red light issue is solved happily.

How to reset the Rock space WiFi extender?

If you are thinking about “How to reset Rock space WiFi repeater”. Then, you have to do the following steps:

• The Rockspace extender has contained the reset button.
• Find the reset button that is located on the back panel.
• Use the pin to hold the reset button that comes into the packaging box of the router.
• Press the reset button of the Rockspace range extender.
• Holding out the reset button of the range extender with the pin or the paper clip.
• Press the reset button just for ten to fifteen seconds.
• Leave the reset button and switch the power again or use it after rebooting it.
• Lastly, the rock space wifi extender factory reset process has been finished now.

How to obtain the rock space wifi extender forgot password?

Below are the steps given for recovering the rock space wifi extender forgetting the password.

• Use Rockspace.local in the web interface and log in to this wireless device.
• Go into the settings home page to set up a wifi repeater forgetting password.
• The Rockspace WiFi extender setup page is opening when you are logged in to this device correctly.
• Locate on the setup page of this wireless device, you have to pick up the wireless settings.
• If you forgot the Rockspace extender password then click on the forgot password.
• Observe the on-screen directions and click on the new password.
• You shall put your new password in the new password field and also confirm it again.
• Click into the save changes option after getting it.
• Now, you can use this new password to connect to the internet of this range extender.

How to Setup Rockspace WiFi extender 0.254 local WiFi?

Use the Rockspace WiFi repeater manual and you have to do the following steps for ist setup:

• Visit the Rockspace extender settings page.
• Enable the settings for the setup WiFi rockspace extender 0.254 local WiFi.
• If the Rockspace Wifi range extender Mac Address is enabled.
• Then, emulate the on-screen visible directions and do the setup accordingly.
• After completing the setup, you must save all your applicable modifications.

How do I setup a Rockspace wi-fi repeater as an access point?

Follow the below-presenting steps for its set up as an access point:

• Go into the setup page of the Rockspace using http://ap.setup into the URL.
• Surf this address and log in to this.
• After finishing the login process, proceed to the Rockspace Wifi Extender Setup page.
• While you add this device than via the setup wizard function and select the mode.
• Choose the Rockspace wi-fi repeater as an access point and apply the settings.
• Now, you can use this wireless range extender as an access point.

Final Words

The easy configuration and setup also make this WiFi extender user-friendly and a deal you shouldn’t miss! So, what are you waiting for? Setup your Rockspace WiFi Extender and enjoy better internet connectivity in all the nooks and corners of your home!